Size: 20 inch Max. Resolution: 1600x1200 UXGA Brightness: 300 Contrast Ratio: 1000:1 Display Area: 386.4(H) x 289.8(V) mm Pixel pitch: 0.255(H) x 0.255(W) mm Response time: Rising Time 15 ms, Falling Time 7 ms Viewing Angle: 170°(L/R),170°(U/D) Back Light: 6 x CCFTs Colors: 16M colors MTBF: 20,000 hours LCD Panel protected by tempered glass
On Screen Control
OSD Control Brightness, Contrast, Phase & Color, H & V position, Auto-tune & Recall
Video Synchronization: 45KHz - 80KHz Input Signal: Analog RGB 0.7Vp-p Option for DVI input
Rear: 1 x D-Sub 15 pin port for VGA 2 x PS/2 for Keyboard and Touchpad
5 x OSD menu button
1 x 6’ all-in-one cable (1-VGA, 2-PS/2) Option for 10’ / 15’ cable
2 x thumb-lock screws for system security
1U low profile drawer Slide rail can be extension up to 36" depth
KD7200: Monitor keyboard drawer, 20 inch 1600 x 1200 LCD panel, standard 15-pin D-sub VGA connector, keyboard with touchpad, 1U high & 26.1" depth rackmount drawer, Black color. Option for DVI input. Price starts at: $1,420.00
PRODUCT DESCRIPTION: The 20-inch (1600 x 1200) industrial LCD panel is a TFT active type digital to digital which connects to the onboard conversion board. The LCD monitor comes with a standard 15-pin VGA connector on the back of the rackmount drawer for your pc system connection. The OSD function lets you adjust the LCD monitor for the best view. All the OSD buttons are located on the front of the LCD monitor for easy access. The monitor can be tilted to a 90-degree horizontal angle. The auto-shutoff function engages whenever it is returned to its resting position, allowing you to save the LCD monitor's life. The keyboard and touchpad are located in the front of the rackmount drawer underneath the LCD monitor. Both of them come with a standard PS/2 or USB type connector on the back of the rackmount drawer for your pc system connection.
The low profile 1U drawer saves on rack space and integrates an LCD monitor, keyboard, and pointing device to a complete unit. The ball-bearing slide rail is mounted on each side of the drawer so that you can pull out the drawer from a 19" rack cabinet. The thumb-locker is installed on the front panel to lock the drawer inside the rack when the monitor keyboard drawer is not in use. A 1 x 6' proprietary cable (1 x 15 pin VGA port for the monitor, 2 x USB or PS/2 port for keyboard and touchpad) is provided. Option for a 10' or 15' cable is available. KD7200 comes with a 110/220VAC auto-switch external power adapter. Option for 12/24/48VDC power adapter is available. The monitor keyboard drawer is ready to mount into a standard 19" rack cabinet and the rear mounting bracket can be extended up to 36" deep for the rack server cabinet.