2U rackmount computer comes with Pentium 4/D/Core 2 DUo ATX system, VGA, 10/100BT LAN, HD, CD-ROM, FD, 3 PCI expansion slots & 300W redundant power supply

SPECIFICATIONS

Construction: Heavy-duty cold-rolled steel. Inside: zinc-plated with bright chromate, Outside: texture-coated ATX M/B: Size: 12" x 13" EATX mother board Processor: Intel Pentiu 4/D CPU Memory: support DDR memory (up to 4GB) On-board Video On-board 10/100BT LAN Dual channel IDE controller 2 x Serial and 1x parallel ports Devices: 1 x 5.25” open drive bay (Optical Device) 1 x 3.5” open drive bay (for 1.44MB FD) 2 x 3.5” hidden drive bay (for 3.5” EIDE HD) Expansion slot: 3 PCI expansion slots Optional for 2 x PCI 64-bits slots Front Panel Controls: Power on/off switch System reset button Front Panel Connector: 2 x USB ports Cooling Fan: 2 x 80mm (45CFM each) ball-bearing fans

Air Filter: Removable and washable Power supply: 460W 110/220VAC Power supply Optional: 460W 110/220VAC redundant power supply Front Security Door: Security door with key-locker Slide rail (optional): 20" / 26” slide rail Color: Black Operation Temperature: 0°C (32°F)~40°C (104°F) Humidity: 5%~95% non-condensing Gross Weight: 40lb Dimension: 19"(W) x 23.3"(D) x 3.5"(H)

Order Information

RMC 6224A:
2U rackmount computer, Pentium 4/D ATX computer D, 512MB memory, on board Video, Lan, Audio, 80GB SATA HD, CD-ROM, 1.44MB FDD, 3 x PCI expansion slots and 460W ATX power supply

What's Inside

The Housing:   2U chassis made of heavy-duty, cold-rolled steel with lockable, drive-protecting front door. Front panel controls include on/off switch, system reset, two USB ports and LEDS to monitor power and hard drive. An 8cm ball-bearing fan delivers more than 40cfm of air to provide ample cooling for this 23.3” deep chassis. Power is delivered via EPS 110/220VAC, 300W redundant power supply. Color: Black. Storage Devices:   The chassis has one 5.25” exposed and one 3.5” exposed drive bays plus two hidden 3.5” bays for hard drives. There is an optional drive configuration of regular 5.25” and slim 5.25” and regular 3.5” exposed drive bays and three 3.5” hidden bays. Standard configuration includes a 52X standard size CD-ROM, a standard 1.44MB floppy drive and a 40GB IDE hard drive. Other configurations are available. System Board:  Standard ATX motherboard with onboard video and 10/100BT Ethernet, Standard I/Os include 2 PS/2, 1 serial, 1 parallel, 2 USB 2.0, 1 RJ-45, 15-pin VGA and line-in, speaker-out and microphone jacks. Standard configuration includes Intel Pentium 4 2.4GHz processor with low-profile fan and heat sink and 256MB RAM. Other CPU speeds and RAM configurations are available. Expansion slots:  Three PCI-32 expansion slots are available via use of a riser card. Power Supply:   460W 110/220VAC ATX power supply, Optional for 460W redundant power supply. Mounting:  Front ears with standard 19-inch rackmount mounting holes allow front mounting to any standard 19-inch rack. Optional system slides allow rear mounting as well to racks from 20 to 26 inches in depth.