2U rackmount storage DAS sytesm with built-in 8 x SCSI-SATA Hot-Swappable HD bays (up to 3.2TB), support RAID, built-in 300w redundant power supply, DUAL external SCSI connector

SPECIFICATIONS

Form Factor 2U rackmount Processor Intel 80321 processor Main Memory 128MB ECC DDR memory (STD) up to 1GB Controller Interface Dual Ultra 320 SCSI channels RAID RAID 0, 1, 10, 3, 5, 30, 50, JBOD support multiple RAID sets Capacity From 0 to 3.2TB and beyond, depending on hard disk drive capacity Hard Drive 8 X Hot-Swappable SATA HDD bays Drive insertion or removal Automatic detection and rebuilding Rebuild hot spare drivers Automatic and transparently Serial Port One RS-232 serial Port Front Panel 1 x LCD display panel 4 x control buttons

Rear Panel Connector 1 x RS232 COM port (console port) 2 x External SCSI Ultra 320 connector Firmware Upgrade Upgrade through RS-232 port Management Tool LCD panel or RS-232 port Power Supply Redundant 300W ATX power supplies Hardware Monitoring Detection for power, fans, disk and temperature failure Dimensions 490mm (D) x 87mm(H) x 431mm(W) Weight 15kg , without hard drive Operation Environment Air temperature: 10°C- 35°C Humidity: 10% - 95% Storage Environment Air temperature: -20°C- 60°C Humidity: 10%-95% Warranty: 1 year limited warranty

Order Information

DAS 208SA:
2U rackmount DAS storage systems comes with 8 x SCSI to SATA bay, redundant power supply.

What's Inside

System configuration:   The system comes with Intel 80321 64-bit procees, 128MB ECC memory (up to 1GB memory) with ECC protcetion NVRAM for RAID configuration and transaction log write-through / back cache support. The on-board dual channel interface Ultra-320 SCSI / Fiber channel to provide the exceptional data transfer rate and reduancy protection. Disk contorller interface:   The on-board dual Ultra 320 LVD SCSI cntroller interface provides 320MB/sec transfer rate on each channel, it also supports the function for tagged command queing and concurrent I/O commands. HD storage :   The system comes with 8 hot-swappable SATA HD BAY, Each bay comes with a removable tray and LCD display to indicated the HD status. It allows hot swap function and automatically rebuilds hot swaped drives. The total storage space can be up to 6.0TB (depend on the SATA HD size). Raid Features and Management:   The RAID support level 0, 1, 10, 3, 5 and JBOD, It can be multiple RAID sets, array roaming, online RAID capacity expansion and RAID level migration simultaneously. The RAID configuration and firmware can be via through on-board RS-232 port . Power Supply:    The system comes with dual 300W redundant power supply to prevent dowm-time.    Mounting:    The 2U chassis can be mounted to 19" rack cabinet, Optional for slide rails.