Form Factor
2U rack-mount

Capacity
From 0 to 2.56TB and beyond
depending on hard disk drive capacity

Power Supply
Redundant 300W ATX power supplies

Hard Drive
8 X Hot-Swappable Enhanced IDE HDD bays

Rear Panel Connector
2 x 10/100 Base-T Ethernet LAN port
1 x Gigabit Ethernet LAN port
1 x RS232 COM port

Front Panel Display
2 x 16 characters LCM support message display

Front Panel LED
4 x LEDs for HDDs /3 x LEDs for LANs
1 x LED for System / 1 X LED for Alarm / 1 X LED for Gigabit
1 x push-button for system reset
1 x push-button for power on/off

Processor
Intel PIII CPU Architecture(up to 1.26G)

Main Memory
One PC100/133 SDRAM DIMM (supports up to 512MB)

IDE Interface
Four onboard IDE controllers
support eight bus mastering ATA 66/100/133Enhance IDE channels

Serial Port
One UART Serial Port

Ethernet
Two 10/100 Base-T Ethernet
optional Gigabit Ethernet
Supporting Fail-over and Trunking

Compact-Flash
One IDE interface CompactFlash socket for embedded O.S.

Hardware Monitoring
Detection for six Fans, and for the CPU thermal temperature monitoring

Web-based File software:
Support Windows, UNIX, Novell, Macintosh network
Software RAID and UPS support (through serial port & SNMP trap)
File management and local file backup (TAPE)

Dimensions
482.6mm (19")(W) x 89mm(3.5")(H) x 520mm(19.7")(D)

Weight
Approx. 12kg without hard drive

Operation environment
Air temperature: 10°C to 35°C
Humidity: 10% to 95%

Storage environment
Air temperature: -20°C to 65°C
Humidity: 10% , V95%

Warranty:
1 years limited warranty