8.4", 12.1", 15" TFT LCD with resistive touchscreen, AMD Geode LX-800 500MHz processor, up to 1GB RAM, point-of-sale systems (card reader optional), with standard VESA mounting holes for panel mount or kiosk type mounting.

GENERAL OVERVIEW
These systems designed as portable or stationary point-of-sale terminals for kiosks among other uses are full all-in-one computers with 500MHz processors, 40, 60 or 80GB hard drives, up to 1GB RAM and large LCD displays with resistive-type touchscreen all integrated into a slim form-factor enclosure ready for panel mounting, wall mounting or mounting on a VESA standard swing arm. A desktop type stand is included in the standard configuration. POS systems come with a wealth of input and output interfaces like two USB 2.0 ports, three RS-232 ports, and an RJ-11 port for cash drawer. An optional card reader is available. They come with onboard 10/100BT LAN as well as video and audio and support Windows and Linux embedded and full operating systems

LCD panel and touch screen:   The 8.4-inch 800x600/12-inch 800x600/15-inch 1024x768 LCD panel is a TFT active type digital to digital which connects to the on board video, It comes wiith standard 15-pin VGA connector on the back of the panel pc for the external display, The resistive type touch screen is mounted on the front of the LCD panel and uses a 5-wire connection to the on-board COM port (standard on COM-3). The resistive-type touch screen provides protection for the LCD panel and is sealed around the front panel housing to prevent water and dust. On board system board:   The embedded system board (AMD Geode LX-800 500MHz) provides the power of the operation, it's comes with the features of the standard mother board and the additional function for industrial application. It accepts AMD LX-800 processor, DDR memory 512MB (std), up to 1GB, 3 x RS-232 ports and on board LAN/Video/Audio, Storage Device:   The system comes standard 2.5" IDE HD 40GB (std) up to 100GB, We also provide disk-on-module or compact-flash drive (up to 4GB) for the Windows CE/XP embedded applicaton. The internal 2.5" IDE HD was mounted on the side of the embedded board. Expansion:   Optional for MSR, ISO STD 2/3 tracks, KB or COM/IF and VFD dislpay module, 2 USB ports for feature external device. Power Supply:    The 110/220VAC auto-switch power adaoter is integrated into the housing, Mounting:    POS PC comes with desktop stand , Its also comes with standard VESA mounting holes on the back of the POS PC.