1U keyboard drawer with built-in keyboard, pointing device and 8/16 port KVM switch

Keyboard and pointing device:   The keyboard and pointing device are mounted on the front of the rackmount drawer, Both of them come with standard PS/2 type connection for a standard server connection.  The built-in pointing device can be touch-pad or track ball . KVM switch:   The 8/16 KVM port is located at the bcak of the keyboard drawer for the bulit-in KVM model, it provides a centeral control console for multi server in a 1U keyboard drawer. One 15pin D-sub VGA port for local monitor display and one casacde port for daisy-link function (up to 8 levels). The KVM switch supports hot-plug and auto scan function, you can select each server through the membrane switch or hot key fuctions. Rackmount drawer:   The 1U drawer saves rack space and integrates the keyboard, pointing device and KVM switch into a complete unit. The ball-bearing slide rail was mounted on each side of the drawer which you can pull-out the drawer from the 19" rack cabinet. The Key-locker is installed on the front panel to lock the drawer inside the rack when the keyboard drawer is not in use. Cables:   It comes with 8/16 6-feet proprietary cable for PS/2 keyboard and pointing device for each on board KVM port. Power adapter:    It comes with an external 110/220VAC power adapter. Mounting:   The keyboard drawer is ready to mount into the standard 19" rack cabinet, the rear mounting bracket cab be extened up to 30" deep for the server rack cabinet.