Form
Factor:
2 U rack mount chassis with 12 open drive bays
Construction:
Heavy Duty Cold Rolled Electroplated Steel
RAID Engine:
Intel IOP 80321 XOR processor, 400MHz
Cache Memory:
256MB ECC DDR memory (STD) up to 1GB
Optional for 72hours battery backup
RAID Level:
RAID-0, 1, 3, 5, 6, 10, JBOD, HotSpare, Hot swap, Auto-rebuild
Raid Feature:
Multiple RAID Selection & Array Roaming
Online RAID Level/Stripe size Migration & Capacity Expansion & Volume Set Growth
Volume Instant availability and background initialization
Greater than 2TB per Volume
Supported Disk Scrubbing / Array Verify scheduling for automatic repair of all raid sets
Login record in the event log with IP address and service
Support MAID - spin down drives when not in use to extend service life Support NTP protocol to synchronize RAID controller clock over the on-board Ethernet port
Drive Bay:
12 x Hot-Swappable 3.5" SATA-II hard drive bays with cableless backplane,
Supports SATA II Disk up to 3.0Gb/s & NCQ
RAID Capacity:
From 0 to 12TB and beyond, depending on hard disk drive capacity and RAID level, Allow Capacity Truncation for HDDs
RAID Management:
Configure and Monitor by HyperTerminal via RS232 and/or Web Browser via LAN/RJ45
|
Embedded SMTP manager monitors all system events, and user can
select to setup email alert notification to single or multiple recipients
Drive
insertion or removal:
Automatic detection and rebuilding
Rebuild hot spare drivers:
Automatic and transparently
RAID Scalability:
1 to 4 Octopus SAS 3-feet cable allows 1- server's SAS port connect up to 4 x DAS212SSA systems. (Optional).
1 to 1 SAS 3-feet cable (standard)
Front LCD Control Panel:
LCD Display with Input Buttons for setup, and error message display System Status indication through LCD, LED and Alarm Buzzer; SES2 Ready
Rear Panel Connector:
Dual 4x mini SAS Connectors ( 2 x SFF8088 ) Support Two Servers/Applications Failover Clustering
Power Supply:
Redundant 1+1 400W power supplies
Hardware
Monitoring:
Front LCD Indicator for RAID Busy, Power supply, Fan, Temperature & FAN, Voltage
Dimensions:
26" (D) x 3.5"" (H) x 19" (W)
Weight:
40lbs, without hard drive
60lbs, with hard drive
Certification:
FCC, UL
|